网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - STT系列气体增压泵使用的

STT系列气体增压泵使用的动力源及优势

发布时间:2019-07-15 16:27:47   发布人:http://www.sdjingtuo.com
它是运用紧缩空气为动力源,以气体增压泵为压力源,输出气体压力与驱动气源压力成比例。经过对驱动气源压力的调整,便能得到相应的增压后的气体压力。当驱动气源压力与增压后的气体压力均衡时,增压泵便中止充压,输出气体压力也就稳定在预调的压力上。
It uses compressed air as power source and gas booster pump as pressure source. The output gas pressure is proportional to the driving gas pressure. By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained. When the pressure of the driving gas source is balanced with that of the pressurized gas, the booster pump will stop charging and the output gas pressure will stabilize on the preset pressure.
二、细致阐明:
Second, elaborate on:
它是运用紧缩空气为动力源,以气体增压泵为压力源,输出气体压力与驱动气源压力成比例。经过对驱动气源压力的调整,便能得到相应的增压后的气体压力。当驱动气源压力与增压后的气体压力均衡时,增压泵便中止充压,输出气体压力也就稳定在预调的压力上。增压压力无级可调,输出气压稳定牢靠。
It uses compressed air as power source and gas booster pump as pressure source. The output gas pressure is proportional to the driving gas pressure. By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained. When the pressure of the driving gas source is balanced with that of the pressurized gas, the booster pump will stop charging and the output gas pressure will stabilize on the preset pressure. The boost pressure can be adjusted steplessly, and the output pressure is stable and reliable.
STT系列气体增压泵为二级增压泵,能够将极低压力的气体增至很高的压力。驱动气体≤8bar,气体输入口的压力范围为0.5-10bar,可增至80Mpa。整台气体增压泵全部采用铝合金及不锈钢制造。
STT series gas booster pump is a two-stage booster pump, which can increase extremely low pressure gas to very high pressure. When the driving gas is less than 8bar, the pressure range of the gas inlet is 0.5-10bar, which can be increased to 80Mpa. The whole gas booster pump is made of aluminium alloy and stainless steel.
该系列泵的驱动活塞直径为160mm,两端泵头均带有排气冷却。
The driving piston diameter of this series of pumps is 160 mm, and the pump heads at both ends are equipped with exhaust cooling.
气体增压泵应用范围
Application Range of Gas Booster Pump
比拟适合用于高压力、小流量的场所,如气密性实验、高压反响釜充气、汽车制动系统测试、高压气体输助注塑等场所。
It is suitable for high-pressure and low-flow places, such as air tightness test, high-pressure reactor charging, automobile brake system testing, high-pressure gas injection and so on.
气体增压泵可紧缩气体介质
气体增压泵
Compressible Gas Medium for Gas Booster Pump
空气、氧气(O2)、氮气(N2)、氢气(H2)、氦气(He)、氖气(Ne)、氩气(Ar)、自然气、煤气二氧化碳(CO2)、一氧化碳(CO)、一氧化二氮(N2O)、重氢(D2)、制冷剂、灭火剂、甲烷丙烷等烷烃类气体、医院呼吸气体(N2+O2)、六氟化硫气体(SF6)乙烯(C2H4)、惰性气体等。
Air, oxygen (O2), nitrogen (N2), hydrogen (H2), helium (He), neon (Ne), argon (Ar), natural gas, gas carbon dioxide (CO2), carbon monoxide (CO), nitrogen monoxide (N2O), heavy hydrogen (D2), refrigerants, fire extinguishers, methane propane and other alkanes, hospital breathing gas (N2+O2), sulfur hexafluoride gas (SF6) ethylene (C2). H 4), inert gas, etc.
⊙多种气体驱动:紧缩空气、氮气、水蒸气、自然气等均可做为泵的驱动气源。
Various kinds of gas drive: compressed air, nitrogen, water vapor, natural gas, etc. can be used as the driving gas source of the pump.
⊙应用范围广:工业范畴用于机床中的气动卡盘夹紧、蓄能器充气、高压瓶充气,将低压气体转换成高压气体等。但凡气源压力不够高,无论是工业机械或测试安装,均可采用气气增压泵。
Wide range of applications: industrial applications for machine tools in the pneumatic chuck clamping, accumulator inflatable, high-pressure bottle inflatable, low-pressure gas into high-pressure gas, etc. However, whenever the pressure of air source is not high enough, whether it is industrial machinery or test installation, gas booster pump can be used.
⊙自动保压:无论何种缘由构成保压回路压力降落,泵将自动启动,补充透露压力,坚持回路压力恒定。
Automatic Pressure Maintenance: No matter what reason constitutes pressure drop in the Pressure Maintenance Circuit, the pump will start automatically, supplement and disclose pressure, and insist on constant pressure in the Circuit.
⊙操作平安:采用气体驱动,无电弧及火花,完好用于有易燃、易爆的液体或气体的场所。
Safe operation: gas driven, no arc and spark, perfect for use in places with flammable and explosive liquid or gas.
⊙维护简单:与其它的气驱泵比拟,泵可完成同样的工作,但其零件及密封少,维护更简单。
Simple maintenance: Compared with other gas drive pumps, the pump can complete the same work, but its parts and seals are less, and maintenance is simpler.
⊙性价比高:气气增压泵是一种活塞式泵,工作时,气体增压泵疾速往复工作,随着输出压力的增高,泵的往复速度减慢直止中止,此时,泵输出的压力恒定,能量耗费,各部件中止运动,由于活塞式泵构造简单,故易于维护。
High performance-price ratio: Gas booster pump is a piston pump. When working, gas booster pump works rapidly and reciprocating. With the increase of output pressure, the reciprocating speed of the pump slows down and stops. At this time, the output pressure of the pump is constant, the energy consumption is high, and the parts stop moving. Because of the simple structure of the piston pump, it is easy to maintain.
有了气体增压泵上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的网站:http://www.sdjingtuo.com 或者来电咨询,我们会尽全力为您解决
With the summary above the gas booster pump, I hope it will be helpful to our customers. If you don't understand or ask for help, please click on our website: http://www.sdjingtuo.com or call for consultation. We will try our best to solve it for you.

13188935873

qq