Pressure and flow rate of driving gas
The driving pressure of all pumps and power units in continuous operation does not exceed 0.69mpa and can reach 1.03Mpa in intermittent operation. In the best performance state, the air consumption of the pneumatic pump, please refer to the required driving gas flow meter.
Working Pressure and Flow
The working pressure of all pumps and power units refers to the output pressure and flow rate of the pump when the driving pressure is 0.48 mpa. If the maximum output pressure of the pump is greater than the required working pressure, it is necessary to consider safety measures. For maximum output pressure, please refer to the "Approximate Ratio Table of Driving Pressure and Output Hydraulic Pressure under Static Conditions" in the catalogue. The selection of power unit is different from that of pump. For workflow, please refer to the "Performance Curve" in the product catalog.
Delivery liquid medium
The hydraulic seal rings are polybutadiene rubber and polyurethane, and the one-way seat is sealed with Teflon. Other sealing materials include fluorocarbons and ethylene propylene, which are mainly used for special medium for delivery. Please consult factory or local distributor for seal information selection.
Affordable volume and weight
For some applications, the size and weight of the pump and power unit should also be considered.
This article is written by Gas Supercharging Pump. For more products and more details, please pay attention to our official website: http://www.sdjingtuo.com. Your patronage is a great support to us.