氧气的化学性质比拟生动。除了稀有气体、活性小的金属元素如金、铂、银之外，大局部的元素都能与氧气反响，氧气具有助燃性，氧化性。由于氧气的化学性质决议了氧气增压类的设备必需采取平安、防爆、无油的设计方式停止设计。
The chemical properties of oxygen are vivid. In addition to rare gases and small active metal elements such as gold, platinum and silver, most of the elements can react with oxygen, which is combustion-supporting and oxidizing. Owing to the chemical nature of oxygen, oxygen pressurization equipment must be designed safely, explosion-proof and oil-free.
菲恩特牌大流量氧气增压充装设备的开发，很好的处理了氧气在充填或者增压过程中遇到的问题，采用双台二级泵停止并联运用，加上中心部件氧气增压泵停止特殊处置，能够完成：，，平安为一体的充装方式，更好的满足客户充装及增压的需求。
The development of Fiente brand oxygen booster filling equipment can well deal with the problems encountered in the filling or pressurizing process of oxygen. The use of two secondary pumps to stop parallel operation, plus the special disposal of the central component oxygen booster pump, can complete: efficient, energy-saving, safe and integrated filling method, better meet customer filling and pressurization needs.
氧气增压设备的原理
Principle of Oxygen Supercharging Equipment
菲恩特牌ZTT氧气增压泵系列为二级增压泵，能够将极低压力的氧气增很高的压力。驱动气体≤8bar，氧气输入口的压力范围为0.5-10bar，可增30Mpa。整台氧气增压泵全部采用铝合金及不锈钢制造。该系列泵的驱动活塞直径为160mm，两端泵头均带有排气冷却。能够使氧气增压泵在工作的时分温度不于过高。且驱动空气释放后能够得到有效的应用。
Fiente ZTT oxygen booster pump series is a two-stage booster pump, which can increase oxygen at very low pressure to very high pressure. When the driving gas is less than 8 bar, the pressure range of the oxygen inlet is 0.5-10 bar, which can be increased to 30 Mpa. The whole oxygen booster pump is made of aluminium alloy and stainless steel. The driving piston diameter of this series of pumps is 160 mm, and the pump heads at both ends are equipped with exhaust cooling. It can make the temperature of oxygen booster pump not too high in working hours. And the driving air can be effectively applied after it is released.
氧气充装系统参数
Parameters of Oxygen Filling System
驱动气压：3-8bar
Driving Pressure: 3-8bar
入口压力范围：0.5-10bar
Inlet pressure range: 0.5-10 bar
输出压力范围：0-30Mpa
Output pressure range: 0-30 Mpa
输出流量：380L/min
Output flow: 380L/min
驱动口G1/2，氧气入口ZG1/2，高压出口ZG1/4（能够依照客户请求非标定做）
Drive port G1/2, oxygen inlet ZG1/2, high-pressure outlet ZG1/4 (can be made according to customer request non-calibration)
I believe that after reading the introduction of the gas booster pump http://www.sdjingtuo.com in this paper, I will have my own understanding of this aspect, and other problems can be solved well in the future.
