热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态气体增压泵不同类型的工作

气体增压泵不同类型的工作原理介绍

发布时间:2019-03-01 14:27:18   发布人:http://www.sdjingtuo.com
气体增压泵是以压缩空气为动力源的一种活塞式增压泵,当进气时增压气控阀的阀芯往复切换作业,控制增压泵活塞以极快的速度作往复动作,随着输出压力的增高,活塞的往复速度减慢直停止,此刻,增压泵输出的压力稳定,能量消耗低,各部件停止作业;无论何种原因形成保压回路压力下降,增压泵将主动启动,弥补走漏压力,保持回路压力稳定。泵体悉数选用铝合金及不锈钢制作,密封件均为进口品,较大驱动气压为8bar。
Gas booster pump is a piston type booster pump powered by compressed air. When the air is intake, the valve core of the booster pneumatic control valve is switched back and forth, and the piston of the booster pump is controlled to move back and forth at a very fast speed. With the increase of the output pressure, the reciprocating speed of the piston slows down until it stops. At this moment, the output pressure of the booster pump is stable, the energy consumption is the lowest, and all parts stop working. Regardless of the reason for the pressure drop in the pressure retaining circuit, the booster pump will actively start to compensate for the leakage pressure and maintain the pressure stability in the circuit. The pump body is made of aluminum alloy and stainless steel. The seals are imported. The maximum driving pressure is 8 bar.
单头单效果气体增压泵作业原理介绍
Introduction to the Working Principle of Single Head and Single Effect Gas Supercharging Pump
单头单效果气体增压泵的驱动活塞直径为160MM,高倍泵头部件均带排气自冷却,无需外加冷却体系。该体系增压泵首要应用于要求输出气压高,而对流量要求不高的场合。
气体增压泵
The driving piston diameter of single-head and single-effect gas booster pump is 160 MM. The head parts of high-power pump all have exhaust self-cooling without additional cooling system. The booster pump of this system is mainly used in situations where the output pressure is high and the flow rate is not high.
双头单效果气体增压泵作业原理介绍
Introduction of operation principle of double-head single-effect gas booster pump
双头单效果气体增压泵,为到达所需压力,气体输入口气压需要一定程序的预增,预增压力因到达的较大压力不同而不同。该体系泵悉数选用铝合金及不锈钢制作,驱动活塞直径为160MM,驱动气压小于等于8bra,较大可增压到80mpa,两头泵头均带有排气冷却,无需外加冷却体系。较单头单效果气体增压泵输出流量大,稳定性更高,首要应用于对压力和流量一起有要求且进气压力均满足要求的场合下。
In order to reach the required pressure, the gas inlet pressure of a double-ended single-effect gas booster pump needs to be pre-increased by a certain program. The pre-increased pressure varies with the maximum pressure reached. Aluminum alloy and stainless steel are used to make all the pumps in this system. The diameter of the driving piston is 160 MM, the driving pressure is less than or equal to 8 bra, and the maximum pressure can be increased to 80 mpa. Both pump heads are equipped with exhaust cooling without additional cooling system. Compared with single-head single-effect gas booster pump, the output flow is larger and the stability is higher. It is mainly used in situations where both pressure and flow are required and the intake pressure meets the requirements.
双头双效果气体增压泵作业原理介绍
Introduction to the Operating Principle of Double-head and Double-effect Gas Booster Pump
双头双效果气体增压泵,适合于各种高压气体测验或是作为简单的高压气体源,能够将极低压力的气体增很高的压力。该系列泵悉数选用铝合金及不锈钢制作,驱动活塞直径为160MM,驱动气压小于等于8bra,较大可增压到80mpa,两头泵头均带有排气冷却,无需外加冷却体系。
Double-head and double-effect gas booster pump is very suitable for various high-pressure gas testing or as a simple high-pressure gas source, which can increase extremely low pressure gas to very high pressure. All the pumps are made of aluminum alloy and stainless steel. The diameter of the driving piston is 160 MM, the driving pressure is less than or equal to 8 bra, and the maximum pressure can be increased to 80 mpa. Both pump heads are equipped with exhaust cooling without additional cooling system.
本文由气体增压泵提供技术支持,更多的详细精彩内容请点击我们的网站http://www.sdjingtuo.com ,我们将会全心全意为您提供满意的服务。
This article is supported by gas booster pump. For more details, please click on our official website http://www.sdjingtuo.com. We will provide you with satisfactory service wholeheartedly.
新闻: