适用于各种轿车软管、胶管、空调管、轿车总成等产品的耐压、爆破功能的检验。用于各种类型的管件的爆裂压力测定和耐压时间测定。其广泛应用于质量检测单位、各种车零部件制造单位、产品质量检测站、科研院校等各种软管的出产、开发研究等范畴。压力试验系统由加压系统和控制、闪现系统组成。加压系统首要由液体增压泵等组成，首要完结系统的加压和保压作业，可保证长时间试验的加压及保压。控制、闪现系统首要完结控制驱动气体的压力，控制卸压，及时闪现压力，控制加压等作业。
It is suitable for testing the pressure and explosion resistance of various car hoses, rubber hoses, air conditioning pipes, car assemblies and other products. It can be used to measure burst pressure and withstand pressure time of various types of pipe fittings. It is widely used in the production, development and research of various hoses, such as quality inspection units, automobile parts manufacturing units, product quality inspection stations, scientific research institutes, etc. Pressure test system is composed of pressure system, control and flash system. Pressure system is mainly composed of liquid booster pump and so on. The first step is to complete the pressurization and pressure-holding operation of the system, which can ensure the pressurization and pressure-holding of long-term test. The control and flashover system mainly completes the control of driving gas pressure, pressure relief, timely flashover pressure, pressure control and other operations.
二、 设备构成：
2. Equipment composition:
1、核心部件：通过液体增压泵对液体进行增压，以达到试验压力要求。
1. Core components: The liquid is pressurized by a liquid booster pump to meet the test pressure requirements.
2、气动两联件：对压缩空气进行过滤及调压；
2. Pneumatic coupler: filter and regulate compressed air;
3、调速阀：调度驱动空气流量，以调度增压器的动作频率， 可延长增压器的使用寿命；
3. Speed regulating valve: dispatching and driving air flow to dispatch the action frequency of the supercharger can prolong the service life of the supercharger;
4、高压过滤器：对气体进行过滤处理；
4. High pressure filter: filter the gas;
5、高压限压阀：设定增压器的自动停机和敞开压力，以保证增压器能在设定压力时自动停机。
5. High-pressure pressure pressure limiting valve: set the automatic shutdown and open pressure of the supercharger to ensure that the supercharger can automatically shut down when the pressure is set.
三、设备特征
III. Equipment Characteristics
1、可轻松完成输出压力任意可调、可控。
1. The output pressure can be easily adjusted and controlled.
2、技体积小、重量轻、外型美观大方。
2. Small size, light weight and elegant appearance.
3、无任何焊接连接，便利拆开，系数高，寿命长、便于维护。
3. No welding connection, easy to disassemble, high safety factor, long life and easy to maintain.
四、技术参数
IV. TECHNOLOGICAL PARAMETERS
1、驱动气压规模：0.1-0.8 Mpa；且输出压力和驱动气压成正比。
1. The driving pressure scale is 0.1-0.8 Mpa, and the output pressure is proportional to the driving pressure.
2、较大耗气量：1Nm3/min。
2. Maximum gas consumption: 1 Nm3/min.
3、压力检验规模：0—300Mpa。
3. Pressure test scale: 0-300 Mpa.
4、作业介质：水、液压油、乳化液。
4. Operating media: water, hydraulic oil and emulsifier.
5、可以通过自动记录仪闪现试验信息。
5. The test information can be flashed through an automatic recorder.
