热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态使用高压氮气增压机需要注

使用高压氮气增压机需要注意什么?

发布时间:2018-11-02 16:33:44   发布人:http://www.sdjingtuo.com
高压氮气增压泵产品进行使用的时候,都会有一些注意事项,只有掌握了相应的注意事项,那么在对高压氮气增压机产品进行使用的时候,才能将高压氮气增压器产品的效能较大化,更好的发挥产品的功能,进而提升工作效率,降低工作人员的工作量。
When high pressure nitrogen supercharger pump products are used, there will be some matters needing attention. Only when the corresponding matters needing attention are mastered, the efficiency of high pressure nitrogen supercharger products can be maximized, the function of products can be better brought into play, and the working efficiency can be improved. To reduce the workload of the staff.
对于相关的工作人员来说,在对高压氮气增压器使用的时候,需要对相关注意事项有所了解,因为该高压氮气增压器采用了高科技,在功能方面都是比较的强,在进行操作的时候,一旦没有遵循相关的操作流程,那么高压氮气增压器就会自动停止,从而直接影响到工厂的效益。因此为了提升高压氮气增压机的性,同时方便工作人员进行使用,掌握相关的注意事项是关重要的。
For the relevant staff, when using the high-pressure nitrogen supercharger, they need to know something about the relevant matters needing attention, because the high-tech high-pressure nitrogen supercharger is relatively strong in function. When operating, once the relevant operation process is not followed, then the high-pressure nitrogen. The supercharger will stop automatically, which will directly affect the efficiency of the plant. Therefore, in order to improve the safety of high-pressure nitrogen turbocharger and facilitate the use of staff, it is essential to grasp the relevant matters needing attention.
气动氮气增压机使用中的注意事项:
Matters needing attention in the use of pneumatic nitrogen booster:
进入气动增压泵的氮气必须是纯净的经过过滤器的清洁高度纯净的气体。
气体增压泵
The nitrogen entering the pneumatic booster pump must be clean and highly purified through the filter.
氮气进入氮气增压机前需要经150目及以上的过滤器进行过滤,对过滤器要定期冲洗和排污,以免造成进口堵塞或损坏增压泵。
Nitrogen should be filtered through filters of 150 meshes or more before entering the nitrogen supercharger. The filters should be washed and sewed regularly to avoid blocking or damaging the booster pump.
氮气增压压力不能超过3Mpa,以免损坏增压泵发生危险。
Nitrogen pressurization pressure should not exceed 3Mpa, so as to avoid damaging the booster pump.
进入氮气增压系统气体驱动缸的空气必须是纯净的经过过滤的压力稳定的气体,其压力可以通过调压阀进行调节。
The air entering the gas driving cylinder of the nitrogen supercharging system must be pure, filtered, pressure-stable gas, whose pressure can be adjusted by a pressure regulating valve.
进行压力调节时,要缓慢进行,应注意观察高压氮气增压泵系统的压力表显示压力,不要超压。
When adjusting the pressure, it should be done slowly for the first time. We should pay attention to the pressure gauge of the high-pressure nitrogen booster pump system to show the pressure, not to overpressure.
氮气增压泵要定期会进行检查检修,使用中随时注意气动氮气增压泵的工作压力,随时检查各高压连接处是否松动,以免发生事故。
Nitrogen booster pumps should be inspected and repaired regularly, and the working pressure of pneumatic nitrogen booster pumps should be noticed at any time in use, and the loosening of high-pressure connections should be checked at any time to avoid accidents.
新闻: