在对高压氮气增压泵产品停止运用的时分，都会有一些留意事项，只要控制了相应的留意事项，那么在对高压氮气增压机产品停止运用的时分，才干将高压氮气增压器产品的效能较大化，更好的发挥产品的功用，进而提升工作效率，降低工作人员的工作量。
When the high-pressure nitrogen supercharger pump product stops using, there will be some matters needing attention. As long as the corresponding matters needing attention are controlled, then when the high-pressure nitrogen supercharger product stops using, the efficiency of the high-pressure nitrogen supercharger product can be maximized, the function of the product can be better exerted, and the work efficiency can be improved, and the workload of the staff can be reduced.
关于相关的工作人员来说，在对高压氮气增压器运用的时分，需求对相关留意事项有所理解，由于该高压氮气增压器采用了高科技，在功用方面都是比拟的强，在停止操作的时分，一旦没有遵照相关的操作流程，那么高压氮气增压器就会自动中止，从而直接影响到工厂的效益。因而为了提升高压氮气增压机的平安性，同时便当工作人员停止运用，控制相关的留意事项是关重要的。
As for the relevant staff, when the high-pressure nitrogen supercharger is used, the need to understand the relevant matters needing attention. Because the high-tech high-pressure nitrogen supercharger is comparable in function, when it stops operation, once it fails to follow the relevant operation process, the high-pressure nitrogen supercharger will automatically stop, thus directly affecting. Benefits of factories. Therefore, in order to improve the safety of the high-pressure nitrogen supercharger, and at the same time when the staff stop using, it is essential to control the relevant matters of attention.
气动氮气增压机运用中的留意事项：
Notice in the operation of pneumatic nitrogen supercharger:
进入气动增压泵的氮气必需是纯洁的经过过滤器的清洁高度纯洁的气体。
Nitrogen entering the pneumatic booster pump must be pure, clean and highly pure gas through filters.
氮气进入氮气增压机前需求经150目及以上的过滤器停止过滤，对过滤器要定期冲洗和排污，以免形成进口梗塞或损坏增压泵。
Nitrogen into the nitrogen supercharger before the need to stop filtering through 150 mesh or more filters, filters should be regularly flushed and sewage, in order to avoid the formation of import obstruction or damage to the supercharger pump.
氮气增压压力不能超越3Mpa，以免损坏增压泵发作风险。
Nitrogen boosting pressure should not exceed 3 Mpa to avoid damaging the risk of booster pump onset.
进入氮气增压系统气体驱动缸的空气必需是纯洁的经过过滤的压力稳定的气体，其压力能够经过调压阀停止调理。
The air entering the gas driving cylinder of the nitrogen supercharging system must be pure, filtered, pressure-stable gas, whose pressure can be stopped by the pressure regulating valve.
停止压力调理时，初次要迟缓停止，应留意察看高压氮气增压泵系统的压力表显现压力，不要超压。
Stop pressure conditioning, the first time to stop slowly, should pay attention to the pressure gauge of high-pressure nitrogen booster pump system shows pressure, do not overpressure.
氮气增压泵要定期会停止检查检修，运用中随时留意气动氮气增压泵的工作压力，随时检查各高压衔接处能否松动，以免发作事故。
Nitrogen booster pump should stop checking and repairing regularly, pay attention to the working pressure of pneumatic nitrogen booster pump at any time in operation, and check whether the high pressure joint can be loosened at any time to avoid accidents.
