热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

网站公告

当前位置:首页 - 网站公告管道增压泵与气体增压泵原

管道增压泵与气体增压泵原理有啥不同?

发布时间:2018-01-31 15:07:06   发布人:http://www.sdjingtuo.com
增压泵利用大面积活塞的低压气体(2—8bar)驱动而在小面积活塞上产生高压气体/液体。可用于压缩空气及其他气体,输出气压可通过驱动气压无级调节。
The pressurized pump uses the low pressure gas (2 - 8bar) of the large area piston to produce high pressure gas / liquid on the small area piston. It can be used to compress air and other gases, and the output pressure can be stepless by driving pressure.
气体管道增压泵有单作用泵和双作用泵,双作用泵气活塞在往复两个冲程中都压缩气体。当驱动气体作用于气活塞时,工作活塞随气驱动就可获得较大的输出流量。气动液体管道增压泵的高工作压力可达到700Mpa,气动气体管道增压泵的工作压力可达到300 Mpa。增压泵高压部分材质为硬质铝合金高压柱塞材质为不锈钢,并采用双层密封。关键部位材质可以根据介质性制选配。
The gas pipeline booster pump has a single action pump and a double acting pump. The double acting pump gas piston compresses the gas in the two stroke cycles. When the driving gas is acting on the gas piston, the working piston can get a larger output flow with the gas driven. The maximum working pressure of the pressurized pump of the pneumatic liquid pipe can reach 700Mpa, and the working pressure of the pneumatic gas pipeline booster pump can reach 300 Mpa. The high pressure part of the pressurized pump is made of stainless steel for hard aluminum alloy high pressure plunger, and double seal is used. The material of the key parts can be selected according to the medium.
1、性价比高,增压泵具有输出性能高而成本低的特性。
1, high cost performance, supercharging pump has the characteristics of high output performance and low cost.
气体增压泵
2、绝大部分管道增压泵采用离心泵。具有性能范围广、制造技术成熟、使用和维护都比较方便。
2. Most of the pipe booster pumps adopt centrifugal pumps. It has a wide range of performance, mature manufacturing technology, and easy to use and maintain.
3、操作方便可靠,调节和维修容易,并易于实现自动化和远距离操作。
3, the operation is convenient and reliable, the adjustment and maintenance are easy, and it is easy to realize automation and long distance operation.
4、可调性强,增压泵输出压力和流量都由驱动气体的压力调节阀准确地调节。
4. It is adjustable, and the pressure and flow of the booster pump are accurately adjusted by the pressure regulating valve of the driving gas.
5、转速较高,可以与电动机和汽轮机直接相连,传动机构简单紧凑。
5, high speed, can be directly connected with the motor and steam turbine, the transmission mechanism is simple and compact.
6、采用管道式结构(进出水口位于同于直线上)设计,安装简单,只需要对接进出水口即可;维护时如非泵体故障,可以不拆除管路部分即可对泵进行整体维护。
6, using the pipeline structure (inlet and outlet in line with) design, installation is very simple, only need to butt the inlet and outlet can be maintained; such as non pump failure, can not remove line part can pump maintenance.
7、结构简单紧凑,体积小,重量轻,零部件少,制造方便,造价低,而且占地面积小,因此它的设备和修理费用都较低廉。
7, the structure is simple and compact, small volume, light weight, less components, easy fabrication, low cost and small floor area, so its equipment and repair costs are relatively low.
新闻: